Water Based Non-Flammable ASTM E 84 Conforming Adhesive

Favicol AC Duct Eco Fresh is water based environment friendly, synthetic resin adhesive, specially developed for HVAC, ducting, chilled water piping and underdeck insulation applications in HVAC & R industry. it is extreamly ideal for green certified & safety priority projects because it has low VOC, low flame retardency and does not emit smoke.

Recommended Application Area

• HVAC ducting insulated with Nitrile rubber, glass wool, rock wool and chilled water piping with glass wool and rock wool
• Under dect insulation with Nitrile rubber, glass wool, rock wool (to be applied along with mechanical fasteners)
• Wall panelling/ acoustic with glass wool and rock wool

Unique Features and Benefits

• Conforms to ASTM E 84 test for low flame spread and low smoke develop index
• Certified as a class A product by exowa warringtonfire
• Fire retardant water based formulation
• Very low VOC (<20gms/litre)
• Higher coverage & hence low adhesive cost per unit area ensures better cost benefit compared to rubber based
• Mild smell and low toxicity. excellent for low ventilated areas and safe for occupants/application
• Very strong bonding ensuring zero reworking costs
• Excellent tack-longer tack retension/open time

Standards Conformation

• Surface burning characteristic - ASTM 84
• Class A/1 product exova warringtonfire
• KGISC/LEED VOC

Type of Building/Application

• Hospitals & Hospitality
• Pharmaceutical & Beverage Industries
• Green Buildings
• Research centre and laboratory
• High density areas such as malls, airports, auditoriums etc

Recommended Method of Application

• Ensure the substrates to be bonded are free from dust/rust/oil/moisture
• Star the adhesive well before use to have a homogeneous material prior to application
• Apply the adhesive by spread only in the uniform layer on both the substrates. do not use brush.
• For faster tack development tack bonding, thin layer of adhesive mandatory
• Allow to developed tack (best judged by change in colour from greenish to colourless)
• Once the tack is developed bonding the substrates can be done even after 2hrs unlike rubber based adhesive
• Press it uniformly by hand pressure taking care that no air pockets are formed
• Cure for 24hrs at ambient temperature
• When glass Wool/Rock Wool substrate are bonded, adhesive should be applied only on Duc/Pipe/Concrete substrates and not on insulation
• For underdect application apply minimum two coats of adhesive on both the surfaces (if required, extras coats can be done depending on substrates porosity)

Precautions & limitations

• keep the container closed when not in use. Stir the adhesive well before use
• do not use the adhesive on undulated surface
• do not dilute. dilution distorts the product performance
• use of PPE's (protective hand gloves, mask & googgles) is strongly recommended

MSDS is available on request

Typical Data

(under identical lab test conditions at ambient on smooth nonporous substrates)

Shelf Life & Storage

12 months from the date of manufacture & when stored in a dry and cool place in the original unopened container. (recommended storage temperature : 20°C to 30°C)

Packing

20 kg plastic drum

Low coverage cost with across multiple applications

Favicol AC Duct King is a synthetic rubber based adhesive specially developed to bond various insulation materials with HVAC ducts, chilled water pipe lines, and underdect in various indusrial & residential projects. The product can be conveniently applied in low ventilated sites at remote places, as the smell is very mild.

Recommended Application Area

• HVAC Ducting - To bond nitrile Rubber/EPDM/XLPE(20 mm thickness max), glass wool/rock wool, PUF to duct surface
• Chilled Water Piping - To bond nitrile rubber/EPDM/XLPE (20 mm thickness max), glass wool/rock wool PUF to MS pipe lines
• Acoustic Insulation - To bond nitrile rubber to concrete walls, vertical surfaces, & duct lining
• Wall Panelling - To bond nitrile rubber/EPDM/XLPE(20 mm thickness max), glass wool/rock wool to smooth concrete wall surface
• Under Dect Insulation - To bond nitrile rubber/EPDM/XLPE (20 mm thickness max), glass wool/rock wool, PUF to smooth concrete wall surface (Mechanical fasteners are recommended for under dect insulation)

Unique Features and Benefits

• Industry first adhesive exclusively for ducting, chilled water pipig recommended for other multiple application
• Higher coverage & hence low coverage cost
• Mild smell ensures no harm to the applicators
• Strong bond durability (Aging resistance) with all types of insulation material
• Free from carcinogenic compounds
• High spreads ability & ease of application

Recommended Method of Application

• Ensure the substrates to be bonded are free from dust/rust/oil/moisture
• Star the adhesive well before use to have a homogeneous material prior to application
• Apply fevicol AC Duct King on both the substrates uniformly by spreader/brush. Use of spreader for flat non-porous insulation surface can help to improve coverage
• When glass wool/rock wool substrates are bonded, adhesive should be applied only on Duc/Pipe/Concrete substrates annd not on insulation
• Once the adhesive become touch dry (when tack is developes), press both substrates together ensuring uniform contact so that air packets are not formed
• Cure for 24hrs at ambient temperature
• For underdect application apply minimum two coats of adhesive on both the surfaces (if required, extras coats can be done depending on substrates porosity)

Precautions & limitations

• Keep the container closed when not in use. Stir the adhesive well before use
• Contains flammable solvents, so precautions in storing
• Adhesive or vapour from the adhesive should not come in contact with fire spots, naked flames or welding areas on shop floor/work sites
• Do not use the adhesive on undulated surface
• Use of PPE's (protective hand gloves, mask & googgles) is strongly recommended

MSDS is available on request

Typical Data

(under identical lab test conditions at ambient on smooth nonporous substrates)

Shelf Life & Storage

12 months from the date of manufacture & when stored in a dry and cool place in the original unopened container. (recommended storage temperature : 20°C to 30°C)

Packing

30 litre drum

Low VOC synthetic rubber based adhesive to bond rubber in HVAC application

Favicol AC Duct King Optima is a synthetic rubber based, low VOC product specially developed for various application in HVAC industry. Is is an excellent adhesive to bond nitrile rubber for insulating HVAC Ducts, chilled water pipe lines and underdeck for various indusrial & residential projects.

Recommended Application Area

• HVAC Ducting - To bond Nitrile Rubber/EPDM (20 mm thickness max) to duct surface
• Chilled Water Piping - To bond nitrile rubber/EPDM/XLPE (20 mm thickness max), glass wool/rock wool PUF to MS pipe lines
• Acoustic Insulation - To bond nitrile rubber,EPDM (20 mm thickness max) to concrete walls, vertical surfaces, & duct lining
• Under Dect Insulation - To bond nitrile rubber/EPDM/XLPE (20 mm thickness max), glass wool/rock wool, PUF to smooth concrete wall surface (Mechanical fasteners are recommended for under dect insulation)

Unique Features and Benefits

• Low VOC product improves the IAQ
• Mild smell does not cause any irritation to the occupants/applicators
• Suitable for low ventilated area
• Very strong bonding ensuring zero reworking costs
• Free from carcinogenics compounds

Recommended Method of Application

• Ensure the substrates to be bonded are free from dust/rust/oil/moisture etc.
• Stir the adhesive well before use to have a homogeneous material prior to application
• Apply fevicol AC Duct King Optima on both the spreader/brush. Use of spreader for flat non-porous insulation surface can help to improve coverage
• Once the adhesive become become touch dry (when tack is developed), press both the substrates together ensuring uniform contact so that air pockets are nt formed
• Cure for 24 hrs at ambient temperature
• For underdeck application, apply minimum two coats of adhesive on both the surface (if required, extra coats can be done depending on surface porosity)

Precautions & limitations

• Keep the container closed when not in use. Stir the adhesive well before use
• Contains flammable solvents, so precautions in storing
• Adhesive or vapour from the adhesive should not come in contact with fire spots, naked flames or welding areas on shop floor/work sites
• Do not use the adhesive on undulated surface
• Use of PPE's (protective hand gloves, mask & googgles) is strongly recommended

MSDS is available on request

Typical Data

(under identical lab test conditions at ambient on smooth nonporous substrates)

Shelf Life & Storage

18 months from the date of manufacture & when stored in a dry and cool place in the original unopened container. (recommended storage temperature : 20°C to 30°C)

Packing

30 litre drum

Popular multipurpose mild smell synthetic rubber based adhesive

Favicol SR 505 is a synthetic rubber based adhesive developed to bond various material with HVAC, Ducts, Chilled water pipe lines, and Underdect in various industrial & residential projects. The product can be conveniently applied in low ventilated sites at remote places, as the smell is very mild.

Recommended Application Area

• HVAC Ducting - To bond Nitrile Rubber/EPDM (20 mm thickness max), Glass Wool/Rock Wool, PUF to Duct surface
• Chilled Water Piping - To bond nitrile rubber, EPDM (20 mm thickness max) Glass Wool/Rock Wool, PUF to MS pipe lines
• Acoustic Insulation - To Bond Nitrile Rubber to concrete walls, vertical surfaces & Duct lining
• Wall Panelling - To bond nitrile rubber/EPDM/XLPE (20 mm thickness max), Glass Wool/Rock Wool to smooth concrete wall surface
• Under Dect Insulation - To bond nitrile rubber/EPDM/XLPE (20 mm thickness max), Glass Wool, PUF to smooth concrete wall surface (Mechanical fasteners are recommended for under dect insulation)

Unique Features and Benefits

• Excellent adhesive to multiple substrates
• Very mild smell ensure the applicators and users will not be harmed
• Strong bond durability (Aging resistance)
• Free from carcinogenic compounds

Recommended Method of Application

• Ensure the substrates to be bonded are free from dust/rust/oil/moisture
• Stir the adhesive well before use to have a homogeneous material prior to application
• Apply fevicol AC Duct King on both the substrates uniformly by spreader/brush. Use of spreader for flat non-porous insulation surface can help to improve coverage
• When glass wool/rock wool substrates are bonded, adhesive should be applied only on Duc/Pipe/Concrete substrates annd not on insulation
• Once the adhesive become touch dry (when tack is developes), press both substrates together ensuring uniform contact so that air packets are not formed
• Cure for 24 hrs at ambient temperature
• For underdect application, apply minimum two coats of adhesive on both the surfaces (if required, extra coats can be done depending on substrates porosity)

Precautions & limitations

• Keep the container closed when not in use. Stir the adhesive well before use
• Contains flammable solvents, so precautions in storing
• Adhesive or vapour from the adhesive should not come in contact with fire spots, naked flames or welding areas on shop floor/work sites
• Do not use the adhesive on undulated surface
• Use of PPE's (protective hand gloves, mask & googgles) is strongly recommended

MSDS is available on request

Typical Data

(under identical lab test conditions at ambient on smooth nonporous substrates)

Shelf Life & Storage

18 months from the date of manufacture & when stored in a dry and cool place in the original unopened container. (recommended storage temperature : 20°C to 30°C)

Packing

30 litre drum

Superior bond with multiple substrates

Favicol SR 998 is a high strength synthetic rubber adhesive specially developed to bond Nitrile Rubber or XLPE to Galvanized Iron. Aluminium duct surface, Mild Steel for insulating HVAC ducts, Chilled water lines and underdect in various indusrial & residential projects

Recommended Application Area

• HVAC Ducting - To bond Nitrile Rubber/EPDM (20 mm thickness max), Glass Wool/Rock Wool, PUF to Duct surface
• Chilled Water Piping - To bond nitrile rubber, EPDM, XLPE and Glass Wool/Rock Wool, PUF to MS pipe lines
• Acoustic Insulation - To Bond Nitrile Rubber to concrete walls, Wood / Metal surfaces & Duct lining
• Wall Panelling for Cold Storages - To bond nitrile rubber, EPDM,XLPE Glass Wool/Rock Wool to smooth concrete wall surface/GI/MS
• Under Dect Insulation - To bond nitrile rubber,EPDM,XLPE Glass Wool/Rock Wool, PUF, PIR/Phenolic foam to smooth concrete wall surface (Mechanical fasteners are recommended for under dect insulation)
• Brine Chilled water Piping - To bond Nitrile Rubber, XLPE to MS pipe lines, Servives temperature of water up tp -20C
• Thermal Storage System Tanks - To bond Nitrile Rubber, EPDM, XLPE to MS Tanks

Unique Features and Benefits

• Outstanding performance for curved surfaces
• Excellent spring back, water and heat resistance
• Superior performance at sub-zero temperatures
• Ideal for refrigeration applications
• Mild smell and hence can be used in low ventilated sites or remote places
• Rapid and strong strength development
• Excellent bond durability (aging resistance)
• free from Carcinogenic compounds

Type of Building/Application

• Hospital and Hospitality
• Pharmaceuticals and Beverages
• Research Centre and Laboratory
• Recording Studios
• Cold Storages
• High density areas such malls, auditoriums etc

Recommended Method of Application

• Ensure the substrates to be bonded are free from dust/rust/oil/moisture etc
• Stir the adhesive well before use to have a homogeneous material prior to application
• Apply fevicol SR 998 on both the substrates uniformly by spreader/brush. Use of spreader for flat non-porous insulation surface can help to improve coverage
• When glass wool/rock wool substrates are bonded, adhesive should be applied only on Duc/Pipe/Concrete substrates annd not on insulation
• Once the adhesive become touch dry (when tack is developes), press both substrates together ensuring uniform contact so that air packets are not formed
• Cure for 24 hrs at ambient temperature
• For underdect application, apply minimum two coats of adhesive on both the surfaces (if required, extra coats can be done depending on substrates porosity)

Precautions & limitations

• Keep the container closed when not in use. Stir the adhesive well before use
• Contains flammable solvents, so precautions in storing
• Adhesive or vapour from the adhesive should not come in contact with fire spots, naked flames or welding areas on shop floor/work sites
• Do not use the adhesive on undulated surface
• Use of PPE's (protective hand gloves, mask & googgles) is strongly recommended

MSDS is available on request

Typical Data

(under identical lab test conditions at ambient on smooth nonporous substrates)

Shelf Life & Storage

18 months from the date of manufacture & when stored in a dry and cool place in the original unopened container. (recommended storage temperature : 20°C to 30°C)

Packing

25 litre drum, 5 litre tin

Quick and high grab adhesive specially developed for Angular Bonding.

Favicol AC Prefab is a new generation synthetic rubber based adhesive, specially developed for bonding Pre insulated panels made of PIR, PU foam, Phenolic foam etc. The Adhesive is fast drying adhesive & develops quick grab which is preferred for faster rate fabrication. it can be easily at all ambient conditions by spreader / brush. It is an ideal adhesive for assembly of pre-fabricated panels for onsite construction of HVAC ducts.

Recommended Application Area

• HVAC Ducting - to bond angular PIR foam or phenolic application
• faster drying at ambient temperature
• quick grab development ensurses higher productivity
• excellent spreadability
• free from carcinogenic compounds

Recommended method of Application

• ensure the substrates to be bonded are free from dust/rust/oil/moisture etc
• stir the adhesive well before use to have a homogeneous material prior to application
• apply the adhesive by brush in thin uniform layer on both the surfaces of PIR, PU/Phenolic foam surfaces
• allow to develop the tack with an open time of 3-4 minutes
• if the surface is porous, apply a second coat & allow to dry second coat 3-4 minutes
• when tack is developed. press firmly & uniformly by hand taking care that no air pockets are formed
• allow to cure the duct assembly for 24 hrs at ambient temperature
• for underdect application, apply minimum two coats of adhesive on both the surfaces (if required, extra coats can be done depending on substrates porosity)

Precautions & Limitations

• keep the container closed when not in use. Stir the adhesive well before use
• contains flammable solvents, so precautions in storing
• adhesive or vapour from the adhesive should not come in contact with fire spots, naked flames or welding areas on shop floor/work sites
• do not use the adhesive on undulated surface
• use of PPE's (protective hand gloves, mask & googgles) is strongly recommended

MSDS is available on request

Recommended Method of Application

• Ensure the substrates to be bonded are free from dust/rust/oil/moisture etc
• Stir the adhesive well before use to have a homogeneous material prior to application
• Apply fevicol SR 998 on both the substrates uniformly by spreader/brush. Use of spreader for flat non-porous insulation surface can help to improve coverage
• When glass wool/rock wool substrates are bonded, adhesive should be applied only on Duc/Pipe/Concrete substrates annd not on insulation
• Once the adhesive become touch dry (when tack is developes), press both substrates together ensuring uniform contact so that air packets are not formed
• Cure for 24 hrs at ambient temperature
• For underdect application, apply minimum two coats of adhesive on both the surfaces (if required, extra coats can be done depending on substrates porosity)

Precautions & limitations

• Keep the container closed when not in use. Stir the adhesive well before use
• Contains flammable solvents, so precautions in storing
• Adhesive or vapour from the adhesive should not come in contact with fire spots, naked flames or welding areas on shop floor/work sites
• Do not use the adhesive on undulated surface
• Use of PPE's (protective hand gloves, mask & googgles) is strongly recommended

MSDS is available on request

Typical Data

(under identical lab test conditions at ambient on smooth nonporous substrates)

Shelf Life & Storage

18 months from the date of manufacture & when stored in a dry and cool place in the original unopened container. (Recommended storage temperature : 20°C to 30°C)

Packing

30 litre drum

No shut down, single component moisture curing adhesive

Favicol 1K PUR is a single component moisture curing adhesive. it curess by reacting with atmospheric moisture to exhibit tough classic bond. It is ideally developed to bond pre-fabricated PIR or Phenolic Sheet, Nitrile rubber, Expandend polystyrene PUF to concrete/mat galvanized iron or MS for Chilled water piping, hot water piping, Under dect or wall panelling application with the help of screwing or clamping. Favicol 1K PUR is Green product with low VOC, extreamly suitable for green certified projects

Recommended Application Area

• HVAC Ducting - To bond glass wool/rock wool expanded polystyrene, PUF to duct surface (Mechanical fasteners required)
• Chilled water piping - to bond expanded polystyrene, PUF, glass wool/rock wool to MS (Bonding can be done even in running condition of chilled water pipes, mechanical fastening is required)
• hot water piping - to bond expended polystyrene to MS pipe. (Hot water up to 80°C, Mechanical fastening is required)
• Under dect & wall panelling - to bond nitrile rubber, EPDM, expended polystyrene glass wool/rock wool, pre-fabricated PIR or Phenolic duct PUF to concrete/GI/MS panel (mechanical fastening is required)
• Overdect Panelling - to bond expended poly styrene and PUF to concrete (mechanical fastening is required)
• Prefabricated Ducts - To bond Metallic/PVC brackets at the edges & corners of PIR or Phenolic ducts

Unique features and benefits

• single component moisture curing and hence excellent for insulation changeover even in running conditions especially in chilled water piping system
• can be applied even when the surface is moist
• no need of shut down for chilled water pipinng system
• ease of apllication as compared to bitumen
• excellent gap filing property
• low VOC/Green product

Recommended method of Application

• Apply adhesive on insulation substrate only by spreader / brush uniformly apply thicker coat of adhesive if bonding with concrete
• then wet the concrete/GI/MS surface by spraying little amount of water
r
• emove the excess water condensed if any, on the rework area surface before bonding
• Then Press the Insulation Substrate on Wall / Chilled Water pipe / duct within 5 min after adhesive application (once appreance of adhesive changes from honey coloured liquid to pale yellow foam) and hold the bonded area by self-adhesive tape/wire/screw/clamp for atleast 2 hrs
• for metallic/PVC brackets to pIR duct bonding apply adhesive on metallic brackets, edges & cornrs of prefacricated duct & press firmly with good contact pressure
• a strong bond is achieved after 2-3 hrs at ambient condition & optimum strength is achieved after 24 hrs
• wgen glass wool/rock wool substrates are bonded adhesive should be applied only on duct/concrete substrates and not on insulation

Precautions & Limitations

• The container to be closed tightly after use as product is moisture curable
• the entire content is the drum/bottle may become solid is exposed to atmospheric air for longer period of time
• use of PPE's (protective hand gloves, mask & googgles) is strongly recommended

MSDS is available on request

Typical Data

(under identical lab test conditions at ambient on smooth nonporous substrates on single side apllication)

Shelf Life & Storage

18 months from the date of manufacture & when stored in a dry and cool place in the original unopened container (Recommended Storage temperature 20°C to 30°C)

Packing

500 ml plastic bottle